Calculator › Scenarios › Sump Pump + Refrigerator

What size generator do I need to run a sump pump and refrigerator?

Q: What size generator do I need to run a sump pump and refrigerator?

Plan on at least 1450 running watts and 2350 watts of surge capacity. That covers 1130W of running load plus the largest start-up surge, with 25% headroom.

Heavy rain knocks the power out — exactly when the sump pump matters most. This combo covers the flooded-basement scenario plus keeping food cold.

The load

Sump pump (1/3 HP) — 800W running, 1500W starting
Refrigerator (full-size) — 300W running, 1500W starting
LED lights (per room) — 30W running

SIZING PLATE3 LOADS · +25% HEADROOM

Total running watts

1,130 W

Peak (largest start)

2,330 W

Buy at least

1,450 W rated

Look for ~1,450W running / 2,350W surge or better.

Field note: If your basement floods badly, prioritize surge capacity: a pump that can't restart against a full pit is a flooded basement with a running generator next to it.

Right size: Mid-size inverter (3,500W / 4,000W surge)

Typical price $600-1,400 · e.g. Champion 4250 open-frame inverter, Westinghouse iGen4500, Generac GP3500iO

RV 13,500 BTU AC (especially with soft-start), fridge + window AC, storm essentials for smaller homes. The sweet spot of quiet, portability, and real capacity for most first-time buyers.

See current prices on Amazon

One size up: Mid-size portable (6,500W / 8,100W surge)

Typical price $700-1,200 · e.g. Westinghouse WGen6500, Champion 6250, Generac GP6500

Storm essentials with margin: fridge, freezer, sump pump, furnace fan, well pump (240V models), lights and electronics together. Louder open-frame design; electronics prefer models with THD under 5% or an inverter.

See current prices on Amazon

Adjust for your setup

Different fridge? Bigger AC? Uncheck and re-check below — the plate recomputes live.

This site earns commissions from qualifying purchases made through links to Amazon and other retailers, at no extra cost to you. Wattage figures are typical estimates — actual draw varies by model. Always verify against your appliance's nameplate, and consult a licensed electrician for any panel or hardwired connections.